Mock Data Challenge Plan » History » Version 5
George, Melissa, 15 January 2015 16:04
| 1 | 1 | Kyberd, Paul | h1. Mock Data Challenge Plan |
|---|---|---|---|
| 2 | 2 | George, Melissa | |
| 3 | Mission Statement: |
||
| 4 | To test the Tracker system from a trigger through the DAQ and software. If possible with cold cryostats and at at least one tracker with full waveguides in place. |
||
| 5 | |||
| 6 | Main Goals: |
||
| 7 | 5 | George, Melissa | * Get a working trigger input from the LED system (Yordans new trigger logic) |
| 8 | 2 | George, Melissa | * One tracker with cold cryos |
| 9 | * One with full waveguides attached |
||
| 10 | * Understand noise in the system |
||
| 11 | * DAQ - Use code that is committed into the repository and hardware defined in the database and updated firmware on VME boards. |
||
| 12 | * LED - repeat November test with everything on LED system hooked up (unless we have a serious noise problem) and determine light yield required. |
||
| 13 | * understand grounding. |
||
| 14 | 3 | George, Melissa | * To have a working monitoring and online reconstruction tool patched into v7r3 in the control room. |
| 15 | 2 | George, Melissa | |
| 16 | |||
| 17 | Secondary Goals: |
||
| 18 | 4 | George, Melissa | * Both trackers with cold cryos |
| 19 | * Both trackers with full waveguides attached |
||
| 20 | 2 | George, Melissa | * LED - determine appropriate brightness required by LED system and set it if possible |
| 21 | * Reduce noise to acceptable levels (cryostat grounding). |
||
| 22 | * Fix issues with grounding (vme crates etc) |
||
| 23 | 3 | George, Melissa | * The monitoring and online reconstruction tool patched int v7r3 in the control showing sensible readout. |