Meeting 2013-11-18 » History » Version 13
Dobbs, Adam, 18 November 2013 16:43
| 1 | 1 | Dobbs, Adam | h1. Meeting 2013-11-18 |
|---|---|---|---|
| 2 | |||
| 3 | Date: 18th November 2013 |
||
| 4 | Time: 16:00 GMT |
||
| 5 | Attendance: D. Adey, A. Dobbs, R. Gamet, M. George, P. Kyberd, C. MacWaters, E. Overton |
||
| 6 | 7 | Dobbs, Adam | Apologies: G. Barber |
| 7 | |||
| 8 | 1 | Dobbs, Adam | |
| 9 | h2. Agenda and Minutes |
||
| 10 | |||
| 11 | 5 | Dobbs, Adam | h3. 0. Actions |
| 12 | 1 | Dobbs, Adam | |
| 13 | 11 | Dobbs, Adam | * Create MICE note of channel mappings end-to-end through hardware, electronics and software. DA, ES, AD, GB (see the review at http://micewww.pp.rl.ac.uk/documents/70) |
| 14 | 1 | Dobbs, Adam | * Dig up the old documentation for the electronics channel mapping - DA |
| 15 | * Ask KL, AB, DA about whether it would be helpful to fit LED into TOF to help our timing. EO |
||
| 16 | * Hits to digits lookup. CH |
||
| 17 | * AD to ask AN if working just outside 300 Gauss line would be enough? - AD |
||
| 18 | |||
| 19 | 5 | Dobbs, Adam | h3. 1. Tracker lab - AB, GB, CMacW |
| 20 | 1 | Dobbs, Adam | |
| 21 | 10 | Dobbs, Adam | * Electronics operations shifted to Fermilab while DA is there |
| 22 | |||
| 23 | 5 | Dobbs, Adam | h3. 2. LED: EO |
| 24 | 1 | Dobbs, Adam | |
| 25 | * Make PCB for main flasher unit buffer - EO |
||
| 26 | * Finish main flasher unit - EO, CMacW |
||
| 27 | * Ask KL, AB, DA about whether it would be helpful to fit LED into TOF to help our timing. EO |
||
| 28 | ** EO talked to Maurizio, Maurizio concerned about extra light levels, EO will produce a document for him. |
||
| 29 | |||
| 30 | 5 | Dobbs, Adam | h3. 3. Installation |
| 31 | 1 | Dobbs, Adam | |
| 32 | * Finish installation manual - GB |
||
| 33 | * Construct safety procedures for performing installing while AFC also operating - AN, AD |
||
| 34 | ** AD to ask AN if working just outside 300 Gauss line would be enough? - AD |
||
| 35 | 3 | Dobbs, Adam | * -Set up installation meeting with hall people, tracker people, diffuser people - GB- The Installation meeting will be tomorrow (19/11) at 13:30 in R9, RAL |
| 36 | 1 | Dobbs, Adam | * Perform metrology on solenoid bore to check clearances, GB talk to John Palin - GB |
| 37 | * Construct dark room tent in R9 - GB, KLs |
||
| 38 | 13 | Dobbs, Adam | * See slides on external waveguide work in the Hall by C. MacW: attachment:LEDandWaveguides.pdf |
| 39 | 1 | Dobbs, Adam | |
| 40 | 5 | Dobbs, Adam | h3. 4. DAQ/Calibration/Controls: DA, EO |
| 41 | 1 | Dobbs, Adam | |
| 42 | 10 | Dobbs, Adam | h4. 4.1 MiniDAQ |
| 43 | |||
| 44 | 1 | Dobbs, Adam | * MiniDAQ (separate from DATE) now done and tested on set up in tracker lab - DA |
| 45 | 10 | Dobbs, Adam | * Needs to be committed to the DAQ repository |
| 46 | * Still needs a full integration test with main MICE DAQ |
||
| 47 | |||
| 48 | h4. 4.2 Channel Mappings |
||
| 49 | |||
| 50 | 1 | Dobbs, Adam | * Check our channel mapping from end to end and make sure correct - DA, AD, ES |
| 51 | 10 | Dobbs, Adam | * Dig up the old documentation for the electronics channel mapping - DA See http://micewww.pp.rl.ac.uk/documents/75 by M. Ellis, derived from D0 note not yet found |
| 52 | * M. Ellis (via P. Kyberd) says it was definitely correct in 2009 in G4MICE) - so, was it correctly translated into MAUS? - ES |
||
| 53 | 1 | Dobbs, Adam | |
| 54 | 10 | Dobbs, Adam | h4. 4.3 Controls |
| 55 | |||
| 56 | * Create controls system - DA, MR |
||
| 57 | 5 | Dobbs, Adam | |
| 58 | 1 | Dobbs, Adam | h3. 5. Services in the MICE hall: CMacW |
| 59 | |||
| 60 | h3. 6. Mitigation of effect of magnetic field: CMacW, MG |
||
| 61 | 5 | Dobbs, Adam | |
| 62 | 1 | Dobbs, Adam | * Need to consider how we will route the waveguides through the yoke (non-trivial) - CMacW |
| 63 | |||
| 64 | h3. 7. Software: AD, ES, CH, ST |
||
| 65 | 2 | Dobbs, Adam | |
| 66 | 1 | Dobbs, Adam | * Milestones: AD |
| 67 | 5 | Dobbs, Adam | |
| 68 | 1 | Dobbs, Adam | See [[SoftwareSchedule|Software Schedule]]. |
| 69 | |||
| 70 | h3. 8. Conferences: DA, AB, KL |
||
| 71 | 5 | Dobbs, Adam | |
| 72 | 1 | Dobbs, Adam | * CHEP (AD) - Paper submitted |
| 73 | 3 | Dobbs, Adam | |
| 74 | h3. 9. AoB and summary of actions. |
||
| 75 | 1 | Dobbs, Adam | |
| 76 | * T1 installation meeting 13:30 GMT, 19th Nov 13, in R9 RAL |
||
| 77 | * Next phone meeting 16:00 GMT, 25th Nov 13 |
||
| 78 | |||
| 79 | h2. Phone Details |
||
| 80 | |||
| 81 | * The four digit company id: 4673 (callers from outside the UK) |
||
| 82 | * The pin number: 419357 |
||
| 83 | |||
| 84 | Phone numbers: |
||
| 85 | |||
| 86 | | UK (Imperial College --preferred) | 0845 545 4460 | English | |
||
| 87 | | Austria | 0820 4000 1503 | English | |
||
| 88 | | | 0820 4000 15 02 | German | |
||
| 89 | | Belgium | 070 35 99 45 | English | |
||
| 90 | | | 070 35 99 94 | Dutch | |
||
| 91 | | | 070 35 98 66 | French | |
||
| 92 | | Canada | 1 712 432 2832 | English | |
||
| 93 | | | 1 712 432 2844 | French | |
||
| 94 | | Germany | 01803 001 178 | English | |
||
| 95 | | | 01570 248 8303 | English (mobile) | |
||
| 96 | | | 01803 001 177 | German | |
||
| 97 | | | 01570 248 8101 | German (mobile) | |
||
| 98 | | Ireland | 0818 270 007 | English | |
||
| 99 | | Italy | 848 390 166 | English | |
||
| 100 | | | 848 391 819 | Italian | |
||
| 101 | | Netherlands | 0870 001 901 | English | |
||
| 102 | | | 0870 001 909 | Dutch | |
||
| 103 | | Poland | 0801 003 543 | English | |
||
| 104 | | | 0801 003 533 | Polish | |
||
| 105 | | South Africa | 087 550 0375 | English | |
||
| 106 | | Spain | 902 885 318 | English | |
||
| 107 | | | 902 881 200 | Spanish | |
||
| 108 | | Sweden | 0939 2066 400 | English | |
||
| 109 | | | 0939 2066 300 | Swedish | |
||
| 110 | |Switzerland | 0848 560 190 | English | |
||
| 111 | | | 0848 560 378 | French | |
||
| 112 | | | 0848 560 347 | German | |
||
| 113 | | | 0848 560 385 | Italian | |
||
| 114 | | United Kingdom (PowWowNow) | 0844 4 73 73 73 | English | |
||
| 115 | | United States | 1 415 363 0833 | English | |