Project

General

Profile

Analysis Code » History » Version 11

George, Melissa, 28 October 2015 16:41

1 1 George, Melissa
h1. Analysis Code
2
3 9 George, Melissa
Please put any code that you have written to perform analysis and reconstruction tasks plots etc into the table below along with a description of what it does and how and the language it is written in.
4 1 George, Melissa
5 4 George, Melissa
h2. Useful Code
6
7 9 George, Melissa
|_.Code        |_.Language      |_.Description             |_. date         |_.name     |
8 7 George, Melissa
|blah.py       |Python          |What it does              | 12/12/99       |  nameX    |
9
|              |                |                          |                |  nameY    |
10 4 George, Melissa
11
h2. Final Script Development
12
13 6 George, Melissa
OnRec and OnMon are visible through MAUS directly
14
15 4 George, Melissa
|_.Code                     |_.Language      |_.Description                                                             |_. date   |
16 9 George, Melissa
| Calibration.py            | Python         | Calibration Script to be run once per shift and checked by experts 
17 1 George, Melissa
                                               to check the calibrations are valid                                      | 28/10/15 |
18 11 George, Melissa
| !ReconstructionPlots.py!  |Python          | Python Script (or eventually an Analysis Package)of Reconstruction Plots | 28/10/15 |
19 5 George, Melissa
| DataValidation.py         | Python         | Script to be run once per run and checked by shifters to check the 
20
                                               validity of the data and that the calibrations are valid.  Then a final 
21
                                               line that based on those checks and tolerances says whether the run is 
22
                                               good for the tracker or not. In Physics Devel                            | 28/10/15 |