Project

General

Profile

Actions

RunPlan20150911

September 11th and/or 12th 11th and/or 12th
estimated time 8:00-16:00 16:00-00:00
MOM V. Blackmore V. Blackmore
Expert Supervisor C. Rogers, M. Bogomilov, E. Overton, D. Rajaram C. Rogers, M. Bogomilov, E. Overton, D. Rajaram
Lead shifter Ao Liu Antonio de Bari
Shifter 2 Chris Booth Maurizio Bonesini
BLOC C. Heidt C. Heidt
SOC
Aim Take data with SSU on full current
Beam? Yes Yes

Beamline Configurations

We expect to be running with 2V beamloss and beam bump active.

Data plan

Assuming beam starts at 8am and ends at 10pm (14 hours)

  1. Pion reference run: settings from Run Control (30 min)
  2. Tracker timing studies (see below): settings from Run Control (2 hours)
  3. Pion reference run: settings from Run Control (30 min)
  4. (3pi, 200) beam line settings from Run Control (2 hours)
  5. Pion reference run: settings from Run Control (30 min)
  6. (3pi, 200) beam line settings from Run Control (2 hours)
  7. Pion reference run: settings from Run Control (30 min)
  8. (3pi, 200) beam line settings from Run Control (2 hours)
  9. Pion reference run: settings from Run Control (30 min)
  10. (3pi, 200) beam line settings from Run Control (2 hours)
  11. Pion reference run: settings from Run Control (30 min)
  12. (6pi, 200) beam line settings from Run Control (1 hour)

Tracker timing studies (2 hours)

Use the following standard pion reference beam (and check this is the std. reference beam):

Particle Species p at Tgt p@D1 p@D2 Proton Absorber Q1 Q2 Q3 D1 DS D2 Q4 Q5 Q6 Q7 Q8 Q9 Similar Run(s)
mm A A A A A A A A A A A A A A A A DAQ run #
Pion Reference ? ? ? 29 57.8 105.7 64.5 202.8 --- 176.9 237.1 157.2 157.6 238.5 125.70 203.7 7257

I would like the following runs:
Target is 25K Triggers in TOF1 per run

Run Type Timing FileName Efficiency Alive Window Alive Window Est. Run #
(Trig/Request) Delay (ns) Width (ns) Spills
Nominal Nominal.cfg 0.8 130 110 (116.4 meas.) 1400 (20min) 7285
Section1 Timing_section1.cfg <0.2 130 30 (35 meas.) 5600 (2hr) ??
Section2 Timing_section2.cfg >0.2 130 30 (30 meas.) 5600 (2hr) ??
Section3 Timing_section3.cfg >0.2 130 30 (35 meas.) 5600 (2hr) ??
Section4 Timing_section4.cfg <0.2 130 30 (35 meas.) 5600 (2hr) ??

Phone details for 9am daily meeting

Phone access : ReadyTalk number

US 866-740-1260

UK 0800-496-0576

Swiss 0800-70-53-51

Italy 800182592

Access Code: 2155402

Updated by Blackmore, Victoria about 7 years ago ยท 5 revisions