h1. Target and Trigger timing + ToF calibration readiness - 28th/29th March 2015

h2. The purpose of the run is to:

* Get the system to a state where ToF (and CKOV) Calibration data can be taken

* Take some TOF calibration data 

h3. Daily schedule

| Date           | Saturday   | Saturday          |   Sunday      | Sunday     |  

| estimated time | 8am - 4pm    | 4 - 12pm        |  8am - 4pm    |  4pm - 12pm |

| MOM            | Y. Karadzhov | Y. Karadzhov    |  Y. Karadzhov | Y. Karadzhov   |

| Lead shifter   | P. Franchini | P. Hanlet       |  P. Frachini  | P. Hanlet       |

| Shifter        |              | P. Soler        |      ?        | P. Soler | 

| BLOC           |              |                 |               | H. Nebrensky   | 

| SOC            |              |                 |               |                |

| Expert         |  Y Karadzhov (DAQ)|  | | |

|  | | | 

| Aim       | Take Data  |  

|           |     |  |   

| Beam?  | Yes | Yes | 

| Additional Personnel |      |  |  

h2. Prerequisites

"Run Preparation List":http://micewww.pp.rl.ac.uk/projects/operations/wiki/RunPreparationList

h2. SOC Shifts

Chris Heidt will cover SOC

h2. Data Requested

* Reference Run: 6-200 setting w/out DS and PA at 29mm

* TOF Calibration setup and run

* Propose to use a pion+ run for data rate studies

h2. Beamline Configurations

* N.B. Decay Solenoid will not be available.

* We expect to be running with 2V beamloss and beam bump active.

h3. Preparation

* We will run beam into the hall so need to secure the MICE Hall

* Target needs to be ready

* BeamLine elements need to be ready

* Detectors need to be ready

* Controls needs to be ready

* DAQ needs to be ready

* OnMon and OnRec need to be ready

* Data Mover needs to be ready

h3. [[RunPlan20150318|Target tuning]]

# Will be carried out on Wednesday evening with Dean Adams

h3. Shifter target training

* at shift handover on Saturday - somewhere between 15:00-17:00

h2. DAQ testing

* The main goal of this run is the commissioning of the new trigger system, which requires a calibration of the Time-of-flight system..

* We will take data with TOF0, TOF1 and Ckov. This means that we will use only one LDC (VME crate).

# We will start with a standalone readout of the TOF0/1 crate. This will be used for detecting eventual problems and debugging. The beam line will be set for Reference Run without Decay Solenoid.

# When we are satisfied with the quality of the data, we will switch to the original DAQ system and will take date for ~500 target pulses.

Reference Run without Decay Solenoid

| Particle Species| p at Tgt | p@D1| p@D2| p@Tof0 |Proton Absorber | Q1 | Q2 | Q3 | D1| DS | D2| Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Similar Run(s)|

|  | MeV/c |MeV/c |MeV/c | MeV/c | mm | A| A| A| A| A| A| A| A | A | A | A | A| DAQ run #|

|  pion| 272.42|268.67|265.98| 143.4| 29 | 57.8 | 105.6 | 64.6 | 202.8| ---| 100.4| 176.8 | 237.1| 157.2| 157.6| 238.5 | 203.7| 5729 |

h2. TOF calibration

# The beam line will be set for  TOF Calibration run

# The goal will be to take 30 000 target pulse or more.

h3. TOF Calibration run

| Number of pulses| Beamloss |  Particle Species| p at Tgt | p@D1| p@D2| Proton Absorber | Q1 | Q2 | Q3 | D1| DS | D2| Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Similar Run(s)|

| #  | V  | mm | A| A| A| A| A| A| A| A | A | A | A | A|A|A|A|A| DAQ run #|

| 30000 | 1 | Positron | 300.0 | 259.7 | 249.58 | 29  | 56.35 | 102.7 | 62.65 | 195.72| ---| 98.59| 163.16 |218.79 | 114.14| 83.40| 125.70 | 80.06| 1678 |

h2. Finish

* Shutdown target and re-open Hall for Monday