Project

General

Profile

Actions

BeamlineProcsDSThermalTrip » History » Revision 1

Revision 1/2 | Next »
Nebrensky, Henry, 14 August 2015 20:32
Initial


What to check if the Decay Solenoid PSU trips

  • Contact expert!

If it's reporting an overtemperature condition, confirm this is the case by checking the indicator lamps on the front of the power supply.
DO NOT reset the interlocks until the DL experts have inspected the system and manually retrieved which temperature channel caused the trip.

Updated by Nebrensky, Henry over 8 years ago · 1 revisions