Project

General

Profile

Actions

Ops/Comm Scheduling meeting

Location : CR11 in R3 @ 15:30 pm on Tuesday 12th

Phone access : ReadyTalk number
US 866-740-1260
UK 0800-496-0576
Swiss 0800-70-53-51
Italy 800182592
Access Code: 2155402

Agenda

  • Actions from last meeting
    • Generate appropriate table to store absorber pressure and material information (Janusz) : Stands
    • DS readback current requires calibration (DL) : stands until close to powerup
    • Ensure cooling channel magnet readback is accurate. Follow Rogers MICE note 474 procedure. - Action Jaroslaw :
      • Chris talked with M. Courthold about current tolerances. Read note 474. Stands
    • Issues arising from last data taking run need to be identified and actioned (Boyd) : Stands
    • Move the tracker CAENbus module higher up the chain (Craig)
    • Ask Vicky Bayliss about the DS compressor which apparently has degraded since a recent service. (Done)
    • Get an estimate for how long it takes to wire in the chiller in (Andy)
    • Colin and John will come up with a plan for the water system work. (Colin/John)
    • Colin/Andy will have a discussion about the best way to mitigate the safety problem around the lack of the PRY deck.
    • Andy G will look at Steve Griffith's Electrical workplan and update the DC on where we are.
  • DONM : 26/4/2016

Updated by Boyd, Steven over 7 years ago ยท 3 revisions