h1. Monte Carlo wish list

What we have currently:

* Well documented set up to pull in Monte Carlo configuration if it gets provided by the engineers

* Well documented set up to configure whatever fields and geometry people need

* Poorly documented module to generate multivariate gaussian beams with a reasonably flexible parameter set

* Well documented module to track and write out Monte Carlo data

* Poorly documented and possibly buggy tracker digitisation

* Elementary but probably reasonable TOF digitisation - but no user documentation

What I think we need in order to perform an end-to-end Monte Carlo of Step IV:

# Step IV MICE "As-designed" (e.g. legacy/FILES/.../Step4.dat) set up needs to be checked and fixed - are the coil geometries correct? Can we get a reasonable beam through? What are the design absorber settings? Are they the same as what we have in Step4.dat

# Functioning digitisation for the tracker

# Trigger digitisation (what form should this take)?

# KL, EMR, Ckov digitisation

# Scalars digitisation

# "As-built geometry" and CDB interface needs to be smoother (operational issue to do with getting geometries into CDB)

What I think we need to improve the "user experience":

# Quick start guide + examples:

## Track a beam through and generate beta function/emittance plots

## Track a beam through and generate reconstructed data ->  beta function/emittance plot at the Tracker Reference Plane

## Anything else?

# Documentation MAUSUserGuide.pdf should be available to download/htmlarised from the wiki

# Documentation - some stuff is in doxygen only, it needs to be in the user guide as well.

# Optics calculation needs to be tidied

# Python interface for extracting the field values