Project

General

Profile

Actions

MAUSDjangoApache » History » Revision 19

« Previous | Revision 19/29 (diff) | Next »
Jackson, Mike, 06 March 2012 14:30


Deploying the MAUS web-front end

Deploy Python 2.7 and related packages

If you do not have and do not want to download the MAUS software (which comes with Python 2.7 and Python easy_install) then keep reading.

Otherwise, go down to the next section, "Deploy ImageMagick".

For full information on deploying Python 2.7, see http://www.python.org/getit/releases/2.7/

To install Python 2.7.2 via building from it's source code:

  • Log in as super-user e.g. using sudo su - or su.
  • Get Python 2.7 source distribution and unpack it,
    $ wget http://www.python.org/ftp/python/2.7.2/Python-2.7.2.tgz
    $ mv Python-2.7.2.tgz Python-2.7.2.tar.gz
    $ gunzip Python-2.7.2.tar.gz 
    $ tar -xf Python-2.7.2.tar 
    $ cd Python-2.7.2
    
  • Configure,
    $ ./configure
    
  • Build,
    $ make
    
  • Install,
    $ make install
    

Deploy Python setuptools

Now, install the Python setup tools (0.6c11) for Python 2.7. For full information, see http://pypi.python.org/pypi/setuptools.

  • Log in as super-user e.g. using sudo su - or su.
  • Get the setuptools egg,
    $ wget http://pypi.python.org/packages/2.7/s/setuptools/setuptools-0.6c11-py2.7.egg#md5=fe1f997bc722265116870bc7919059ea
    
  • Execute the egg,
    $ sh setuptools-0.6c11-py2.7.egg 
    

This will install the Python easy_install tool.

Deploy ImageMagick

The ImageMagick library is used to convert between image types in the MAUS web-front end. For full information see http://www.imagemagick.org/script/index.php

Check to see if you already have this as it is a commonly deployed tool,

$ /usr/local/bin/convert -h
Version: ImageMagick 6.7.4-0 2011-12-13 Q16 http://www.imagemagick.org
Copyright: Copyright (C) 1999-2011 ImageMagick Studio LLC
Features: OpenMP    

If so then go down to the next section on installing Django, MagickWand and PIL.

To install ImageMagick 6.7.4,

  • Log in as super-user e.g. using sudo su - or su.
  • Get and unpack ImageMagick,
    $ wget http://www.imagemagick.org/download/ImageMagick.tar.gz
    $ gunzip ImageMagick.tar.gz
    $ tar -xf ImageMagick.tar
    $ cd ImageMagick-6.7.4-0/
    
  • Configure,
    $ ./configure
    
  • Make,
    $ make
    
  • Install,
    $ make install
    
    • This places libraries in /usr/local/lib.
  • Cache the libraries,
    $ ldconfig /usr/local/lib
    
    • This avoids problems with libraries not being found by Python's magickwand library.
  • Check,
    $ /usr/local/bin/convert -h
    Version: ImageMagick 6.7.4-0 2011-12-13 Q16 http://www.imagemagick.org
    Copyright: Copyright (C) 1999-2011 ImageMagick Studio LLC
    Features: OpenMP    
    

Deploy Django, MagickWand and Pyton Image Library Python packages

Install these Python packages using easy_install:

  • If you do NOT have and do NOT want to download the MAUS software and have deployed Python 2.7 as a super-user then, first log in as super-user e.g. using sudo su - or su.
  • Run,
    $ easy_install django
    $ easy_install magickwand
    $ easy_install pil
    
Check MagickWand,
$ python
$ import magickwand
$ from magickwand.image import Image
...
  • If you get an error like,
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
      File "build/bdist.linux-i686/egg/magickwand/image.py", line 2, in <module>
      File "build/bdist.linux-i686/egg/magickwand/api/__init__.py", line 1, in <module>
        #
      File "build/bdist.linux-i686/egg/magickwand/api/lib.py", line 11, in <module>
      File "/home/michaelj/maus-bzr/maus/third_party/install/lib/python2.7/ctypes/__init__.py", 
      line 353, in __init__ self._handle = _dlopen(self._name, mode)
    OSError: libMagickWand.so.5: cannot open shared object file: 
     No such file or directory
    
  • then run ldconfig as described in the instructions for ImageMagick above.

Deploy Apache 2.2

Apache 2.2 (http://httpd.apache.org/) is an HTTP server. For full deployment information, see http://httpd.apache.org/docs/current/install.html

If you do not want to use Apache 2 but are happy to use the stand-alone lightweight Django web server then go down to Deploy the MAUS Django web front-end.

  • Log in as super-user e.g. using sudo su - or su.
  • Download,
    $ wget http://mirrors.ukfast.co.uk/sites/ftp.apache.org//httpd/httpd-2.2.22.tar.gz
    
  • Extract,
    $ gzip -d httpd-2.2.22.tar.gz 
    $ tar xvf httpd-2.2.22.tar
    $ cd httpd-2.2.22
    
  • Configure,
    $ ./configure
    
    • This uses a default deployment directory of /usr/local/apache2.
  • Compile,
    $ make 
    
  • Install,
    $ make install 
    
  • Start-up server,
    $ /usr/local/apache2/bin/apachectl -k start
    
    • If you get an error like,
      (98)Address already in use: make_sock: could not bind to address [::]:80
      (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
      no listening sockets available, shutting down
      Unable to open logs
      
    • Then edit /usr/local/apache2/conf/httpd.conf,
      $ xemacs /usr/local/apache2/conf/httpd.conf 
      
    • and change,
      Listen 80 
      
    • to a port that is not in use e.g.
      Listen 9090
      
    • and start Apache,
      $ /usr/local/apache2/bin/apachectl -k start
      
  • Browse to http://localhost:8080 (or whatever port you specified above) and you should see It works!"

Useful files:

  • Configuration: /usr/local/apache2/conf/httpd.conf
  • Error log: /usr/local/apache2/logs/error_log

mod_wsgi deployment

mod_wsgi (http://code.google.com/p/modwsgi/) is an Apache module allowing the hosting of Python applications which suppport Python's WSGI (Web Server Gateway Interface). For full deployment information, see http://code.google.com/p/modwsgi/wiki/QuickInstallationGuide, http://code.google.com/p/modwsgi/wiki/InstallationInstructions and http://code.google.com/p/modwsgi/wiki/InstallationIssues

  • Download latest release (July 2010),
    $ wget http://modwsgi.googlecode.com/files/mod_wsgi-3.3.tar.gz
    
  • Extract,
    $ gunzip mod_wsgi-3.3.tar.gz 
    $ tar -xf mod_wsgi-3.3.tar
    $ cd mod_wsgi-3.3
    
  • Set Python library path.
    • If you have Python 2.7 installed and it is your default Python then skip this step.
    • If you are using Python 2.7 in the MAUS software then set LD_PYTHON_PATH to the location of its libraries e.g. if using Python bundled with MAUS, set:
      $ export LD_LIBRARY_PATH=/home/user/maus/third_party/install/lib/
      
  • Configure,
    • If you have Python 2.7 installed and it is your default Python then run,
      $ ./configure --with-apxs=/usr/local/apache2/bin/apxs
      
    • If you are using Python 2.7 in the MAUS software you need to provide the path, so run,
      $ ./configure --with-apxs=/usr/local/apache2/bin/apxs
        --with-python=/home/user/maus/third_party/install/bin/python2.7
      
    • If you get an error like:
      /home/user/maus/third_party/install/bin/python2.7: error while loading 
      shared libraries: libpython2.7.so.1.0: cannot open shared object file: 
      No such file or directory
      
    • Then set the LD_LIBRARY_PATH as above.
    • If you get an error like:
      checking for apxs2... no
      checking for apxs... no
      checking Apache version... ./configure: line 1704: apxs: command not found
      ./configure: line 1704: apxs: command not found
      ./configure: line 1705: apxs: command not found
      ./configure: line 1708: /: is a directory
      
      checking for python... /home/user/maus/third_party/install/bin/python
      ./configure: line 1877: apxs: command not found
      configure: creating ./config.status
      config.status: error: cannot find input file: Makefile.in
      
    • Then you forgot to provide the path to Apache's apxs command,
  • Compile,
    $ make
    
  • Install,
    $ make install
    
  • A mod_wsgi.so library is installed in /usr/local/apache2/modules.
  • Configure Apache, edit /usr/local/apache2/conf/httpd.conf,
    $ xemacs /usr/local/apache2/conf/httpd.conf 
    
  • and add,
    LoadModule wsgi_module modules/mod_wsgi.so
    
  • Set the LD_LIBRARY_PATH in the Apache environment.
    • If you have Python 2.7 installed and it is your default Python then skip this step.
    • If you are using Python 2.7 in the MAUS software then set LD_PYTHON_PATH to the location of its libraries e.g. if using Python bundled with MAUS, then:
      • Edit /usr/local/apache2/bin/envvars and add a line to set the Python library path e.g.
        LD_LIBRARY_PATH="/home/user/maus/third_party/install/lib/:$LD_LIBRARY_PATH" 
        
      • Ensure that the permissions in this path allow group and world read and execute permission (755) e.g.:
        $ ls -l /home
        drwxr-xr-x 26 user group 4096 Mar  6 10:08 user
        
    • If not then set these,
      $ chmod go+rx /home/user
      
  • Restart Apache,
    $ /usr/local/apache2/bin/apachectl restart
    
  • If all is well you should see, in /usr/local/apache2/logs/error_log a line like,
    [Tue Feb 07 18:50:37 2012] [notice] Apache/2.2.22 (Unix) mod_wsgi/3.3 
    Python/2.7.2 configured -- resuming normal operations
    
  • If you see an error like,
    [Tue Feb 07 18:46:40 2012] [notice] SIGHUP received.  Attempting to restart
    httpd: Syntax error on line 55 of /usr/local/apache2/conf/httpd.conf: Cannot 
    load /usr/local/apache2/modules/mod_wsgi.so into server: 
    libpython2.7.so.1.0: cannot open shared object file: No such file or directory
    
    • then you have to set the LD_LIBRARY_PATH as above.
  • If you see an error like,
    Could not find platform independent libraries <prefix>
    Could not find platform dependent libraries <exec_prefix>
    Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
    ImportError: No module named site
    
    • then it is likely you did not set the file permissions for the directory in which Python is as described above.
  • Clean up,
    $ make clean
    

To check your installation (following http://code.google.com/p/modwsgi/wiki/CheckingYourInstallation),

  • List server information,
    $ /usr/local/apache2/bin/httpd  -V
    Server version: Apache/2.2.22 (Unix)
    ...
    Server MPM:     Prefork
      threaded:     no
        forked:     yes (variable process count)
    Server compiled with....
     -D APACHE_MPM_DIR="server/mpm/prefork" 
    ...
    
    • Important information is the version and prefork settings,
  • List compiled-in modules,
    $ /usr/local/apache2/bin/httpd  -l
    Compiled in modules:
    ...
      prefork.c
    
    • You should see prefork.c.
  • List dynamically-loaded modules,
    $ /usr/local/apache2/bin/httpd  -M
     mpm_prefork_module (static)
     ...
     wsgi_module (shared)
     ...
    
    • You should see wsgi_module.
    • If this fails with,
      httpd: Syntax error on line 55 of /usr/local/apache2/conf/httpd.conf: 
      Cannot load /usr/local/apache2/modules/mod_wsgi.so into server: 
      libpython2.7.so.1.0: cannot open shared object file: No such file or directory
      
    • Then set your LD_LIBRARY_PATH as above and try again,
      $ export LD_LIBRARY_PATH="/home/michaelj/maus-bzr/maus/third_party/install/lib/:$LD_LIBRARY_PATH" 
      $ /usr/local/apache2/bin/httpd -M
      Loaded Modules:
      ...
      
  • List modules linked to by mod_wsgi:
    $ ldd /usr/local/apache2/modules/mod_wsgi.so
    ...
    libpython2.7.so.1.0 => /home/michaelj/maus-bzr/maus/third_party/install/lib/libpython2.7.so.1.0 
    (0x00110000)
    ...
    
    • You should see the link to your Python library.

Deploy the MAUS Django web front-end

  • Check-out the MAUS Django code,
    $ bzr branch -v lp:~michaelj-h/maus-apps/devel maus-apps
    
  • Set up environment,
    $ cd maus-apps
    $ ./configure
    $ ./install.sh
    
  • Copy a couple of sample images,
    $ cp images/* media/raw
    
  • Log in as super-user e.g. using sudo su - or su.
  • Edit Apache 2.2 environment, so it has access to the MAUS and MAUS web-front end environments (in particular all the Python libraries that have been easy_installed):
    $ xemacs -nw /usr/local/apache2/bin/envvars
    
  • Add, changing to use your own paths,
    source /home/michaelj/maus-bzr/maus/env.sh 
    source /home/michaelj/maus-apps/env.sh
    
  • Ensure that the permissions in to your paths allow group and world read and execute permission (755) e.g.:
    $ ls -l /home
    drwxr-xr-x 26 michaelj epcc 4096 Mar  6 10:08 michaelj
    
    • If not then set these,
      $ chmod go+rx /home/michaelj
      
  • Edit Apache 2 configuration,
    $ xemacs -nw /usr/local/apache2/conf/httpd.conf
    

    Add,
    WSGIScriptAlias / ${MAUS_WEB_DIR}/apache/django.wsgi  
    
    # Location of django.wsgi 
    <Directory ${MAUS_WEB_DIR}/apache> 
    Order deny,allow  
    Allow from all  
    </Directory> 
    
  • where:
    • / specifies the root URL - so all URL requests will be directed to Django.
    • /... - location of WSGI file within the MAUS Django project.
  • Restart Apache 2.2,
    $ /usr/local/apache2/bin/apachectl restart
    
  • Test,

For general information on Django deployment under Apache 2.2/mod_wsgi, see https://docs.djangoproject.com/en/1.3/howto/deployment/modwsgi/ and http://code.google.com/p/modwsgi/wiki/IntegrationWithDjango.

Updated by Jackson, Mike over 9 years ago · 19 revisions