MAUSCelery » History » Revision 18
Revision 17 (Jackson, Mike, 02 February 2012 16:59) → Revision 18/31 (Jackson, Mike, 02 February 2012 17:00)
h1. Celery configuration and monitoring
{{>toc}}
MAUS can be used with the Celery asynchronous distributed task queue to allow transform steps to be executed on multiple processors.
For full information on using Celery, see http://celeryproject.org/ and:
* "Introduction":http://docs.celeryproject.org/en/latest/getting-started/introduction.html
* "Help resources":http://ask.github.com/celery/getting-started/resources.html
* "User doc":http://ask.github.com/celery/index.html
* "Source code":https://github.com/ask/celery/tree/master/celery
h2. Installation
Celery is automatically downloaded and installed when you build MAUS.
h2. Configure a host to run a Celery worker
To configure a host to run a Celery worker:
* Ensure MAUS is available on the host you want to use as a Celery worker.
* Ensure you have run:
<pre>
$ source env.sh
</pre>
* If you have deployed RabbitMQ on a remote host,
** Edit @src/common_py/mauscelery/celeryconfig.py@
** Change
<pre>
BROKER_HOST = "localhost"
</pre>
to specify the full hostname of the host on which RabbitMQ was deployed e.g.
<pre>
BROKER_HOST = "maus.epcc.ed.ac.uk"
</pre>
h2. Start up a Celery worker
To start up a Celery worker, run:
<pre>
$ celeryd -l INFO -n WORKER_ID
</pre>
where @WORKER_ID@ is a unique ID for the worker. You should provide one of these as it helps when monitoring if you are using many workers.
h3. Specify the number of sub-processes
The worker will set up a number of sub-processes, depending on the number of CPUs available to your host. You can explicitly set the number of sub-processes via the @-c@ flag e.g.
<pre>
$ celeryd -l INFO -n WORKER_ID -c 2
</pre>
You can specify as many sub-processes as you like but exceeding the number of CPUs available may cause performance to suffer.
h3. Purge queued tasks
If any tasks are held by RabbitMQ awaiting despatch to workers then the worker, when started, will immediately start to process these. If you want to purge this queue prior to your worker starting, which can be useful if one or more workers have ran into problems and you don't want the backlog of pending tasks to be processed after you restart them, then use the @--purge@ flag e.g.
<pre>
$ celeryd -l INFO -n WORKER_ID --purge
</pre>
See also "Purge queued tasks" below.
h3. Specify the logging level
The @-l@ flag specifies the logging level of the worker. The other options, asides from @INFO@, are @DEBUG@, @WARNING@, @ERROR@, @CRITICAL@ e.g.
<pre>
$ celeryd -l DEBUG -n WORKER_ID
</pre>
The default logging format is:
<pre>
[%(asctime)s: %(levelname)s/%(processName)s] %(message)s
</pre>
You can specify another format in @src/common_py/mauscelery/celeryconfig.py@ using a @CELERYD_LOG_FORMAT@ variable. See the Python @logging@ module, http://ask.github.com/celery/configuration.html#logging, for more on logging.
h2. Initialise the worker to execute MAUS tasks
By default, Celery workers use the default MAUS configuration and apply the MapPyDoNothing transform. They need to be explicity configured to apply other transformations.
If you are running analyses using a client that uses Go.py then this configuration will be done by Go.py on your behalf.
If you are not using Go.py then you can do this manually (or in your own Python code) using the MAUS-specific commands described below in "Birth the worker workers' transforms".
h2. Monitoring and management
Celery provides a number of commands to allow inspection of Celery workers. Many of these can be invoked from the command-line, via the @celeryctl@ command, or from within Python. For full information, see http://ask.github.com/celery/userguide/monitoring.html
In the following, the names shown e.g. @worker1@, @worker2@ etc. are the worker names specified with the @-n@ flag when starting the workers using @celeryd@.
In the invocations of the Celery @inspect@ command in Python, a specific Celery worker can be specified e.g.
<pre>
i = inspect("worker1")
</pre>
where the worker name is that given to the @-n@ flag when @celeryd@ is invoked to start the worker.
h3. Check live workers
Check for live Celery workers that have registered with RabbitMQ and are available for use:
<pre>
$ celeryctl status
worker1: OK
worker2: OK
2 nodes online.
</pre>
<pre>
$ celeryctl inspect ping
<- ping
-> worker1: OK
pong
-> worker2: OK
pong
</pre>
To specify a specific worker, use @-d@ e.g.:
<pre>
$ celeryctl inspect -d worker1 ping
<- ping
-> worker1: OK
</pre>
From within Python, use:
<pre>
$ from celery.task.control import inspect
$ i = inspect()
$ i.ping()
{u'worker1': u'pong', u'worker2': u'pong'}
</pre>
h3. Check worker configuration
<pre>
$ celeryctl inspect stats
<- stats
-> worker1: OK
{u'autoscaler': {},
u'consumer': {u'broker': {u'connect_timeout': 4,
u'hostname': u'127.0.0.1',
u'insist': False,
u'login_method': u'AMQPLAIN',
u'port': 5672,
u'ssl': False,
u'transport': u'amqp',
u'transport_options': {},
u'userid': u'maus',
u'virtual_host': u'maushost'},
u'prefetch_count': 8},
u'pool': {u'max-concurrency': 2,
u'max-tasks-per-child': None,
u'processes': [11991, 11992],
u'put-guarded-by-semaphore': True,
u'timeouts': [None, None]},
u'total': {}}
-> worker2: OK
{u'autoscaler': {},
u'consumer': {u'broker': {u'connect_timeout': 4,
u'hostname': u'maus.epcc.ed.ac.uk',
u'insist': False,
u'login_method': u'AMQPLAIN',
u'port': 5672,
u'ssl': False,
u'transport': u'amqp',
u'transport_options': {},
u'userid': u'maus',
u'virtual_host': u'maushost'},
u'prefetch_count': 8},
u'pool': {u'max-concurrency': 2,
u'max-tasks-per-child': None,
u'processes': [21964, 21965],
u'put-guarded-by-semaphore': True,
u'timeouts': [None, None]},
u'total': {}}
</pre>
From within Python, use:
<pre>
$ from celery.task.control import inspect
$ i.stats()
{...}
</pre>
h3. Check registered tasks
Check the tasks that each worker can execute.
<pre>
$ celeryctl inspect registered
<- registered
-> worker1: OK
* celery.backend_cleanup
* celery.chord
* celery.chord_unlock
* celery.ping
* mauscelery.maustasks.MausGenericTransformTask
-> worker2: OK
* celery.backend_cleanup
* celery.chord
* celery.chord_unlock
* celery.ping
* mauscelery.maustasks.MausGenericTransformTask
</pre>
From within Python, use:
<pre>
$ from celery.task.control import inspect
$ i = inspect()
$ i.registered()
{u'worker1': [u'celery.backend_cleanup',
u'celery.chord',
u'celery.chord_unlock',
u'celery.ping',
u'mauscelery.maustasks.MausGenericTransformTask'],
u'worker2': [u'celery.backend_cleanup',
u'celery.chord',
u'celery.chord_unlock',
u'celery.ping',
u'mauscelery.maustasks.MausGenericTransformTask']}
</pre>
h3. Check task states
Check the tasks submitted for execution to a Celery worker by a client.
Check the tasks currently being executed by the worker:
<pre>
$ celeryctl inspect active
<- active
-> worker1: OK
* {u'args': u'(\'{MAUS_SPILL_DOCUMENT}\', \'maus.epcc.ed.ac.uk (13067)\', 13)',
u'time_start':1327503329.679438, u'name':u'mauscelery.maustasks.MausGenericTransformTask',
u'delivery_info':{u'consumer_tag': u'2', u'routing_key': u'celery', u'exchange':u'celery'},
u'hostname': u'worker1', u'acknowledged': True, u'kwargs':u'{}',
u'id': u'7222138d-bb2d-4e1b-ba70-5c0f9e90aa08', u'worker_pid':13059}
* {...}
...
</pre>
Note the @worker_pid@ which specifies the process ID of the Celery sub-process executing the task.
Check the tasks received by the worker but awaiting execution:
<pre>
$ celeryctl inspect reserved
<- reserved
-> worker1: OK
* {u'args': u'(\'{MAUS_SPILL_DOCUMENT}\', \'maus.epcc.ed.ac.uk (13067)\', 95)',
u'time_start': None, u'name': u'mauscelery.maustasks.MausGenericTransformTask',
u'delivery_info': {u'consumer_tag': u'2', u'routing_key': u'celery', u'exchange': u'celery'},
u'hostname': u'worker1', u'acknowledged': False, u'kwargs': u'{}',
u'id': u'ee1b3a88-58cc-4e26-b77d-4424ec9161d1', u'worker_pid': None}
* {...}
...
</pre>
Note the @worker_pid@ which specifies the process ID of the Celery sub-process executing the task is currently @None@.
From within Python. use:
<pre>
$ from celery.task.control import inspect
$ i = inspect()
$ i.active()
{u'worker1': [...], ...}
$ i.reserved()
{u'worker1': [...], ...}
</pre>
h3. Get results
When a task is submitted to a Celery worker, a unique task ID is generated. Using this ID you can collect the results of a task, providing you have not collected them already, using @celeryctl@ e.g.
<pre>
$ celeryctl result 95b3c56e-bea9-433d-aecd-920601c5ad20
{"digits": [{"tdc_counts": 1, "channel_id": {"fiber_number": 106, "tracker_numbe
r": 0, "type": "Tracker", "station_number": 1, "plane_number": 2}, "adc_counts":
...
</pre>
*Warning* Results can only be collected once. If you do this when running an analysis it may cause problems with your client (which may wait to receive the results that you've already collected. This command should only be used for debugging or trying to establish why things are going wrong. For example, if the Celery worker needs to be terminated and you want to get results from RabbitMQ.
h3. Purge queued tasks
To purge tasks currently awaiting dispatch from RabbitMQ. This can be useful if one or more workers have ran into problems and you don't want the backlog of pending tasks to be processed after you restart them.
<pre>
$ celeryctl purge
Purged 4 messages from 1 known task queue.
</pre>
From within Python, use:
<pre>
$ from celery.task.control import discard_all
$ discard_all()
4
</pre>
h3. Shut down workers
All workers can be shut down from within Python via:
<pre>
$ from celery.task.control import broadcast
$ broadcast("shutdown")
</pre>
Each worker will complete the tasks they are currently processing before shutting down.
Alternatively, you can use the Linux @kill@ command e.g.:
<pre>
$ ps -a
12614 pts/6 00:00:02 celeryd
12627 pts/6 00:00:00 celeryd
12628 pts/6 00:00:00 celeryd
$ kill -s TERM 12614
</pre>
The process ID should be that of the main worker process. This will usually have the lowest process ID.
To kill the worker *immediately*, without waiting for currently processing tasks to complete, use:
<pre>
$ kill -s KILL 12614
</pre>
To kill all @celeryd@ processes, use:
<pre>
$ ps auxww | grep celeryd | awk '{print $2}' | xargs kill -9
</pre>
h2. MAUS-specific monitoring and management
These actions are supported by Celery worker's running on top of MAUS.
h3. Get worker MAUS configuration
Get the current MAUS configuration known to the workers, and the transforms that the workers will execute:
<pre>
$ from celery.task.control import broadcast
$ broadcast("get_maus_configuration", reply=True)
[{u'worker1': {u'config_id': 123, u'configuration': u'{}', u'transform': u'MapPyDoNothing'}}]
</pre>
where:
* @config_id@ - a unique ID for the current worker configuration.
* @configuration@ - the worker's MAUS configuration as forwarded by a client.
* @transform@ - the transforms that the worker will apply to a spill. A list represents a MapPyGroup and nested lists represent nested MapPyGroups.
h3. Birth the worker workers' transforms with a MAUS configuration
Update a worker with a new MAUS configuration and transforms. Existing transforms have death invoked. The new transforms are created and then birth is invoked upon them with the new configuration.
<pre>
$ from celery.task.control import broadcast
$ broadcast("birth", arguments={"configuration":"""{"TOFconversionFactor":0.01}""", \
"transform":"MapPyDoNothing",
\"config_id":123}, reply=True)
[{u'maus.epcc.ed.ac.uk': {u'7692': {u'status': u'ok'}, u'7693': {u'status': u'ok'}}}]
</pre>
where:
* @config_id@ - a unique ID for the worker configuration.
* @configuration@ - the MAUS configuration.
* @transform@ - the transforms that the worker will apply to a spill. A list represents a MapPyGroup and nested lists represent nested MapPyGroups.
The status returned shows the worker IDs and the sub-process(es) within the worker, along with whether the operation was successfully invoked within the sub-processes.
IF @birth@ is called twice with the same @config_id@ then this action does nothing and the status returned is:
<pre>
[{u'maus.epcc.ed.ac.uk': {}}]
</pre>
h3. Death the worker workers' transforms
Invoke death on the workers' transforms:
<pre>
$ from celery.task.control import broadcast
$ broadcast("death", reply=True)
[{u'maus.epcc.ed.ac.uk': {u'7692': {u'status': u'ok'}, u'7693': {u'status': u'ok'}}}]
</pre>
The status returned shows the worker IDs and the sub-process(es) within the worker, along with whether the operation was successfully invoked within the sub-processes.
IF @death@ is called twice then this action does nothing and the status returned is:
<pre>
[{u'maus.epcc.ed.ac.uk': {}}]
</pre>
h3. Get information on worker processes
Get a list of the worker node processes and their child processes (child processes are responsible for executing jobs):
<pre>
$ from celery.task.control import broadcast
$ broadcast("get_process_pool", reply=True)
[{u'worker1': {u'master_name': u'MainProcess',
u'master_pid': 12614,
u'pool_pids': [12627, 12628]}}]
</pre>
The sub-process IDs correspond to those visible in the @processes@ field of the document returned by the @celeryctl inspect stats@ command, described in "Check worker configuration" above and to those visible if running the Linux @ps -a@ command e.g.
<pre>
$ ps -a
12614 pts/6 00:00:02 celeryd
12627 pts/6 00:00:00 celeryd
12628 pts/6 00:00:00 celeryd
</pre>
h3. Restart the workers
To restart Celery workers, run:
<pre>
$ from celery.task.control import broadcast
$ broadcast("restart_pool", reply=True)
[{u'worker1': {u'status': u'ok'}}]
</pre>
This instructs the Celery worker to terminate its sub-processes and spawn new ones. These new ones will inherit any updated configuration or transforms sent using @birth@ above.
In the @celeryd@ window you might see this:
<pre>
Consumer: Connection to broker lost. Trying to re-establish the connection...
Traceback (most recent call last):
...
...
...
error: [Errno 4] Interrupted system call
</pre>
This can be ignored. If in doubt you can use @get_maus_configuration@ above to ensure that the workers have the new configuration.
Note: Celery 2.5 supports a @broadcast("pool_restart")@ command which has the same intent as the above. At present MAUS uses Celery 2.4.6 which is the latest one available via @easy_install@.