Project

General

Profile

Actions

2019-03-18 amp-evolv

17:00 GMT Monday 18th March

http://mice.iit.edu/phonebridge.html

Actions

intro (KL)
0th paragraph add section headings
-1st paragraph needs revision; check historical details
-3rd paragraph need caveat on e+e

DONE 4th paragraph need frictional cooling

observables (CR)
introduce cooling formula; but phrased ito amplitude (FD) CR to integrate with paper (CR)
remove sentence regarding 9% centile just before eq 1
Add a sentence regarding "human readable" what is kNN algorithm FD to check CR's understanding (FD)
Joining sentence between "observables" and "MICE"

MICE
(CR) contact Jason Tarrant and photo repro regarding image for now keep working on it amongst ourselves
(FD) upload schematic latex to overleaf
(FD) Add labels to schematic; make lH2 not LiH absorber; general "look and feel" stuff
(CR) remove phase space figure to MICE note; consider 2d amplitude plot instead a la Francois thesis figure 6.25

Results
DONE (CR) francois asked by email - why is mc_reco sample size not same as reco sample size (they are supposed to be same sample it is impurity at high radius (tracks in MC fiducial but not data fiducial); is impurity properly handled by correction mechanism? Need to check; relies on migration matrix non-unitary
(CR) investigate the 17.5 mm bin issue esp at 10-140 could check rebinning but low priority for now
(CR) investigate the scraping aperture looks like it is MC offset; add a vertical line corresponding to the scraping aperture; comment in text
(FD) fractional emittance is better than most significant bin as a table
(FD) need to do the efficiency correction on fractional emittance
(FD) need to do the efficiency correction on density
(CR) Check apertures in lH2 vs None absorber; KL claims window aperture should be mostly not there in "None"
(CR/FD) Check systematic for density plot in TKU 10 mm; why is SSU CC giving such large uncertainty?

Notes from CM53

Try Nature before Nature physics

Fig. 1 - schematic
(CR) Preferably plot B_{z}, or introduce an arbitrary factor of -1 after the absorber, or label as |B|
(CR) Note that the sigma(x) plot comes from linear beam optics calculation

Fig. 2 - phase space 2d plots
(CR) Interesting that there is a cliff in the x-py and y-px plots. Is this diffuser aperture (or some other aperture)
DONE (CR) If show Phase space plots, put one beam ellipse on won't show ellipse

Fig. 3 - amplitude pdf
DONE (CR) Add the amplitude pdf plot without corrections to the supplementary information
(CR) Plot amplitude pdf as a histogram or without horizontal errors
(CR) Afterwards, JHC pointed out that log(n) vs sqrt(A) is linear for Gaussian beam. It might just confuse people to plot it.
DONE (CR) Vertical axis label is wrong. Normalisation needs to be explained.

Fig. 4 - pdf ratio
(CR) Make MC less visible in pdf ratio plot - it tends to dominate
(CR) Increase the MC stats (implies going to production MC, it is time)

Fig. 5 - cdf ratio
(CR) The number of significant figures in the table is too great. Need to understand the difference between the errors for different data
(CR) John and KL asked for raw pdf numbers
(CR) Discussion of which bin to choose and how to quantify the level at which we observe cooling
  • Soler suggested CLS method
  • Others suggested looking at significance of first bin rather than most significant bin

(CR) Move the points to the bin edge, not bin centre; look and feel issues
DONE (CR) Check systematic error correlations are handled correctly

(CR) General - check the systematic error is reasonable; e.g. do we need to include big error for SSU and for SSD; check we only use -ve error in SSU
(CR) General - move to production

Other jobs

(CR) Check - why is the systematic error so much higher on density plot than e.g. amplitude pdf plot?
(CR) Add labels to schematic
DONE (CR) Fix or explain kink in 10-140 plot amplitdue pdf
DONE but needs second pass (CR) Write methods section
(CR) Update MICE Note
(FD) Add comment noting the beam used for the Poincare plot
(FD) Add date to the schematic
(ALL) Stats test for table
DONE (CR) Data to francois for poincare section
(FD) Poincare section plots
(CR) Fix bibliography; should reference as much as possible up to 50 refs!

Updated by Rogers, Chris over 3 years ago · 14 revisions