2017-01 limits

Email from Josef:

Chris, we need to take into account the M1 (and to a degree M2) currents and the FC currents. John Cobb's suggestion to use 
a relation like IF = 184 - 0.24IM seems to be a good first approach. So: if M1 is 200A we would put the FC to 136A. 

The above relation is for flip mode but I cannot see a good reason why we shouldn't use it as a guide for solenoid mode too.

For each setting I would consider the interaction force too of course and, at this stage, we have not been above 15t.

Rogers: note IF = Focus coil current; IM = M1 current

Updated by Rogers, Chris over 6 years ago ยท 3 revisions