Project

General

Profile

Feature #671

CADImport - tracker

Added by Rogers, Chris over 12 years ago. Updated about 11 years ago.

Status:
Open
Priority:
Normal
Assignee:
Heidt, Christopher
Category:
Tracker
Target version:
Future MAUS release
Start date:
12 August 2011
Due date:
31 August 2011 (over 12 years late)
% Done:

0%

Estimated time:
Workflow:

Description

Transform current MiceModules description of tracker to an XML description for integration with tracker geometry

Files

Tracker_Info.txt (35.9 KB) Tracker_Info.txt GDML translation from the tracker file : "Tracker1.dat" Lysenko, Oleg, 07 October 2011 22:40

Related issues

Related to MAUS - Feature #672: Update gdml schema for tracker geometryOpenHeidt, Christopher12 August 201131 August 2011

Actions
#1

Updated by Tunnell, Christopher about 12 years ago

Updates?

#2

Updated by Tunnell, Christopher about 12 years ago

At Fermilab next week if you're at UC.

#3

Updated by Lysenko, Oleg about 12 years ago

Transformation of the tracker geometry in a GDML format.

#4

Updated by Tunnell, Christopher about 12 years ago

  • Assignee changed from Lysenko, Oleg to Littlefield, Matthew
#5

Updated by Tunnell, Christopher about 12 years ago

  • Assignee changed from Littlefield, Matthew to Lysenko, Oleg

Actually: per chat with Alan and Oleg, do these numbers agree with NIM paper?

#6

Updated by Tunnell, Christopher about 12 years ago

Note: Ken wants to discuss this, so things may change.

#7

Updated by Tunnell, Christopher about 12 years ago

Also: was the file you sent generated by converting by hand? Or did you start with a CAD drawing from somebody like Geoff Barber?

#8

Updated by Lysenko, Oleg about 12 years ago

Yes, the file was generated by converting by hand.

#9

Updated by Tunnell, Christopher about 12 years ago

May be worth considering a script that generates XML where the script is only a few lines of code and constants. XML doesn't allow repeating volumes but code does.

#10

Updated by Lysenko, Oleg about 12 years ago

Sounds good, but what is the tool (CAD) to write such a script?

#11

Updated by Lysenko, Oleg about 12 years ago

  • Status changed from Open to Closed
  • % Done changed from 0 to 100

The work is done.

#12

Updated by Rogers, Chris about 12 years ago

I'm not quite sure, this has not been merged with the trunk as far as I know, should it really be closed?

#13

Updated by Rogers, Chris about 12 years ago

  • Status changed from Closed to Open
  • % Done changed from 100 to 0
#14

Updated by Dobbs, Adam about 12 years ago

Discussion and work are ongoing. Updates should follow...

#15

Updated by Rogers, Chris about 11 years ago

  • Assignee changed from Lysenko, Oleg to Heidt, Christopher

Another one on tracker geometry for you Chris. Feel free to clean up issue trackers into a form that suits you...

Also available in: Atom PDF