problems with beam line information handling
Found two bugs pertaining to the application of dipole currents in the geometry and reading the diffuser settings from the CDB beam line information.
Updated by Bayes, Ryan over 6 years ago
- Due date set to 19 June 2015
- Category set to Geometry
- Assignee set to Bayes, Ryan
- Target version set to Future MAUS release
- Estimated time set to 0.50 h
The problem with the dipole currents was that the D1Current was used to calculate the D2 field scaling. This is likely a remanent of copying lines the last time that the field scaling was corrected.
The diffuser error was due to accessing a pre formatting copy of the MAUS information file that does not contain the diffuser thickness. This was fixed by correcting the file reference.