Project

General

Profile

Bug #1695

problems with beam line information handling

Added by Bayes, Ryan over 8 years ago. Updated over 8 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
Geometry
Target version:
Start date:
19 June 2015
Due date:
19 June 2015
% Done:

100%

Estimated time:
0.50 h
Workflow:
New Issue

Description

Found two bugs pertaining to the application of dipole currents in the geometry and reading the diffuser settings from the CDB beam line information.

#1

Updated by Bayes, Ryan over 8 years ago

  • Due date set to 19 June 2015
  • Category set to Geometry
  • Assignee set to Bayes, Ryan
  • Target version set to Future MAUS release
  • Estimated time set to 0.50 h

The problem with the dipole currents was that the D1Current was used to calculate the D2 field scaling. This is likely a remanent of copying lines the last time that the field scaling was corrected.

The diffuser error was due to accessing a pre formatting copy of the MAUS information file that does not contain the diffuser thickness. This was fixed by correcting the file reference.

#2

Updated by Bayes, Ryan over 8 years ago

  • Status changed from Open to Closed
  • % Done changed from 0 to 100

Corrections committed to launchpad.

Also available in: Atom PDF