Test fail on SL64 - test_geometry_validation
26 January 2015
I had a brief look at this - it is almost certainly a memory size issue. The test that is failing is at:
The memory usage is high because the test job runs over a 15 m long beamline with 5 mm step size in r, z and stores everything in memory. That is 150,000 steps, each of which is probably one or two hundred bytes or so in memory. I will fix it in a bit.
Updated by Rogers, Chris almost 8 years ago
- Status changed from Open to Closed
- % Done changed from 0 to 100
Looks like this is okay for now...