Project

General

Profile

Bug #1465

Damaged PPS sensor on eqipment door

Added by Nebrensky, Henry about 8 years ago. Updated over 7 years ago.

Status:
Closed
Priority:
Normal
Category:
Safety
Start date:
13 May 2014
Due date:
27 June 2014
% Done:

100%

Estimated time:
2.00 h

Description

The mechanical proximity sensor for the Equipment Door has been mangled - see eLog entry 2726


Related issues

Blocks Operations - Bug #1620: PPS issues from January 2015 testsOpenMacWaters, Craig 04 February 2015

Actions
#1

Updated by MacWaters, Craig about 8 years ago

Just bent back mechanical actuator so at least the door contact works basically.

The actuator needs a new screw to attach to frame more securely

On the personnel door nearby the doorstop strip has started to come away and also the main upright is now loose at the bottom making it very hard to close the door.
The weld between the upright and the sliding door is broken. We at least need a right angle bracket to hold it square.
I think we should show these problems to C.Cornish and get him to sort it out.

#2

Updated by MacWaters, Craig about 8 years ago

C.Cornish not available to do this. Need to show Andy N and Eamonn from the workshop about best way to repair.

IN THE MEANTIME, FOR PPS OPERATION, THE DOOR SHOULD BE CLOSED BY SOMEONE OUTSIDE AS A PERSON INSIDE PUSHES THEIR FOOT AGAINST THE BOTTOM OF THE BLUE FRAME.

#3

Updated by MacWaters, Craig over 7 years ago

  • Status changed from Open to Closed
  • % Done changed from 0 to 100

December 2014. Eamonn made a new heavy duty bracket fitted on the lowest part of the sliding door that pushes the mating edge square and now means that the auxiliary door can be shut without it fouling on the frame.

Also available in: Atom PDF