Project

General

Profile

DataTakingPlan v1

Task Description Momentum # Triggers # shifts SSU (ECE) SSU M1/M2 FC SSD (ECE) SSD M1/M2
Straight track data
1 TOF Calibration 1 N N/N N N N/N
2 TOF rate studies 4+2 N N/N N N N/N
3a Detector alignment 200 1000k at TOF1 1 N N/N N N N/N
3b 300 1000k at TOF1 1 N N N N/N N/N
3c 400 1000k at TOF1 1 N N N N/N N/N
Beamline Commissioning Needs to be defined
4a Proton absorber study 140, 170, 200, 240 300k at TOF1 for 3 PA settings 2 N N/N N N N/N
4b Diffuser study 200 300k at TOF1 for 4 diffuser setting + empty 2 Y N/N N N N/N
Magnet alignment
5a Focus coil alignment - sol 200 100k at TOF2 1.5 N N/N Solenoid N N/N
5b Focus coil alignment - sol 300 100k at TOF2 1.5 N N/N Solenoid N N/N
(5c) (Focus coil alignment - flip) 200 100k at TOF2 1.5 N N/N Flip N N/N
(5d) (Focus coil alignment - flip) 300 100k at TOF2 1.5 N N/N Flip N N/N
6a SSU alignment 200 100k at TOF2 1.5 Y Y/N N N N/N
6b SSU alignment 300 100k at TOF2 1.5 Y Y/N N N N/N
6c SSD alignment 200 100k at TOF2 1.5 N N/N N Y N/N
6d SSD alignment 300 100k at TOF2 1.5 N N/N N Y N/N
Lattice and Optics validation
7a Current settings at nominal for ECE, FC 200 1000k at TOF2 1 Y N/N Solenoid Y N/N
7b Vary current settings around nominal for ECE coils 200 100k at TOF2 3 @ 0.25 shifts per setting Y N/N Solenoid Y N/N
7c Current settings at nominal for ECE, M1U M2U coils 200 1000k at TOF2 1 Y Y/Y Solenoid Y N/N
7d Vary current settings around nominal for ECE, M1U M2U coils 200 100k at TOF2 3 Y Y/Y Solenoid Y N/N
Dynamic aperture check